20, 40, 60XT 15, 35XT 30, 50XT 2, 4, 6, 8 & FX SLM & SLM XL Vision
Floorstanding Bookshelf Center Channel Compact Speakers Ultra-Slim Sound Bar

Manuals, Brochures & Remote Control Codes

Click to download in PDF format:


Technical Specifications

 
 Motion 60XTMotion 40Motion 20
MSRP (US)$2,999.95 per pair$1,899.95 per pair$1,499.95 per pair
Frequency Response35–25,000 Hz ±3dB40–25,000 Hz ±3dB46–25,000 Hz ±3dB
Dispersion80° x 30°80° x 80°80° x 80°
Sensitivity94 dB/2.83 volts/meter92 dB/2.83 volts/meter90 db/2.83 volts/meter
Nominal Impedance4 Ohms. Compatible with 4, 6 or 8 ohm rated amplifiers.4 Ohms. Compatible with 4, 6 or 8 ohm rated amplifiers.4 Ohms. Compatible with 4, 6 or 8 ohm rated amplifiers.
Recommended Amplifier Power20-400 watts per channel20-300 watts per channel20-200 watts per channel
Crossover Frequency400 & 2,200 Hz500 & 2,600 Hz500 & 2,600 Hz
Crossover ComponentsCustom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection.Precision Vojtko™ with custom air core coil and low DCR steel laminate inductors. Polyester film capacitors in series and low DF electrolytic capacitors in parallelPrecision Vojtko™ with custom air core coil and low DCR steel laminate inductors. Polyester film capacitors in series and low DF electrolytic capacitors in parallel
High Frequency Transducer1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm1" × 1.4" (2.6cm × 3.6cm) Folded Motion Transducer with 5.25" × 1.75" (13.3cm × 4.4cm) diaphragm1" × 1.4" (2.6cm × 3.6cm) Folded Motion Transducer with 5.25" × 1.75" (13.3cm × 4.4cm) diaphragm
Mid Frequency Driver6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes.5.5" (14cm) aluminum cone in a non-resonant asymmetrical chamber format. Cast polymer basket. Rigid structured dustcap reduces cone break-up.
Low Frequency DriverTwo 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes.Two 6.5" (16.5cm) aluminum cone woofers in a non-resonant asymmetrical chamber format. Cast polymer basket. Rigid structured dust caps reduce cone break-up.Two 5.5" (14cm) aluminum cone woofers in a non-resonant asymmetrical chamber format. Cast polymer basket. Rigid structured dust caps reduce cone break-up.
Binding PostsCustom 5-way bi-wire tool-less binding postsCustom 5-way bi-wire tool-less binding postsCustom 5-way bi-wire tool-less binding posts
SpikesIncluded MiniETC™ SpikesIncluded MiniETC™ SpikesIncluded MiniETC™ Spikes
Weight66lbs. (30kg) each49lbs. (22.2kg) each37lbs. (16.8kg) each
Overall Dimensions
(HxWxD)
48 x 11.4 x 14.4 (121.8cm x 29cm x 36.6cm)42.5 x 7.6 x 12.8 (107.9cm x 19.2cm x 32.6cm)36.6 x 6.8 x 11.7 (92.9cm x 17.3cm x 29.7cm)


 
 Motion 35XTMotion 15Motion 4Motion 2
MSRP (US)$1,199.95 per pair$799.95 per pair$249.95 each$199.95 each
Frequency Response50–25,000 Hz ±3dB60–25,000 Hz ±3dB70–25,000 Hz ±3dB110–25,000 Hz ±3dB
Dispersion80° x 30°80° x 80°80° x 80°80° x 80°
Sensitivity92 dB/2.83 volts/meter92 dB/2.83 volts/meter90 dB/2.83 volts/meter86 dB/2.83 volts/ meter
Nominal Impedance4 Ohms. Compatible with 4, 6 or 8 ohm rated amplifiers.5 Ohms. Compatible with 4, 6 or 8 ohm rated amplifiers.4 Ohms. Compatible with 4, 6 or 8 ohm rated amplifiers.4 Ohms. Compatible with 4, 6 or 8 ohm rated amplifiers.
Recommended Amplifier Power20-250 watts per channel20-200 watts per channel20-150 watts per channel20-100 watts per channel
Crossover Frequency2,200 Hz2,700 Hz2900 Hz2800 Hz
Crossover ComponentsCustom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection.Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Overall system thermal/current protection.Custom air core coil and low DCR steel laminate inductors. Polyester film capacitors in series and low DF electrolytic capacitors in parallel. Overall system thermal/current protection. Custom air core coil and low DCR steel laminate inductors. Polyester film capacitors in series and low DF electrolytic capacitors in parallel. Overall system thermal/current protection.
High Frequency Transducer1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm1" × 1.4" (2.6cm × 3.6cm) Folded Motion Transducer with 5.25" × 1.75" (13.3cm × 4.4cm) diaphragm1" × 1.4" (2.6cm × 3.6cm) Folded Motion Transducer with 5.25" × 1.75" (13.3cm × 4.4cm) diaphragm1" × 1.4" (2.6cm × 3.6cm) Folded Motion Transducer with 5.25" × 1.75" (13.3cm × 4.4cm) diaphragm
Low Frequency Driver6.5” (16.5cm) aluminum cone with cast polymer basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes.5.25” (13.3cm) aluminum cone with cast basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes.4" (10.2cm) paper cone with stamped steel basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes. Folded bass reflex port.3.5" (8.9cm) poly cone with stamped steel basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes. Sealed.
Binding PostsCustom 5-way tool-less binding postsCustom 5-way tool-less binding postsPush style with banana jacksPush style with banana jacks
Weight18.5lbs. (8.4kg) each12lbs. (5.4kg) each6lbs. (3.2kg) each4lbs. (1.81kg) each
Overall Dimensions
(HxWxD)
13.5 x 7.6 x 11.8 (34.3cm x 19.2cm x 30cm)11.4 x 6.8 x 9.5 (29cm x 17.3cm x 24cm)12.6 x 5.6 x 5.25 (32cm x 14.2cm x 13.3cm)11.3 x 5.3 x 4.5 (28.6cm x 13.3cm x 11.4cm)


 
 Motion SLM XLMotion SLMMotion FX
MSRP (US)$699.95 each$499.95 each$399.95 each
Frequency Response100–25,000 Hz ±3dB110–25,000 Hz ±3dB70–25,000 Hz ±3dB
Dispersion80° x 80°80° x 80°160° x 80°
Sensitivity94 dB/2.83 volts/meter94 dB/2.83 volts/meter91 dB/2.83 volts/meter
Nominal Impedance4 Ohms. Compatible with 4, 6 or 8 ohm rated amplifiers.4 Ohms. Compatible with 4, 6 or 8 ohm rated amplifiers.4 Ohms. Compatible with 4, 6 or 8 ohm rated amplifiers.
Recommended Amplifier Power20-140 watts per channel20-140 watts per channel20-160 watts per channel
Crossover Frequency3,100 Hz2,600 Hz4500 Hz
Crossover ComponentsCustom air core coil inductors. Polyester film capacitors in series and low DF electrolytic capacitors in parallel. Overall system thermal/current protection.Custom air core coil inductors. Polyester film capacitors in series and low DF electrolytic capacitors in parallel. Overall system thermal/cur- rent protection.Custom air core coil inductors. Polyester film capacitors in series and low DF electrolytic capacitors in parallel. Overall system thermal/current protection.
High Frequency Transducer1" × 1.4" (2.6cm × 3.6cm) Folded Motion Transducer with 5.25" × 1.75" (13.3cm × 4.4cm) diaphragm1" × 1.4" (2.6cm × 3.6cm) Folded Motion Transducer with 5.25" × 1.75" (13.3cm × 4.4cm) diaphragmTwo 1" × 1.4" (2.6cm × 3.6cm) Folded Motion Transducer with 5.25" × 1.75" (13.3cm × 4.4cm) diaphragm
Low Frequency DriverTwo 4” (10.2cm) paper cone. Four 4” (10.2cm) paper cone passive radiators.Two 4” (10.2cm) paper cone. Two 4” (10.2cm) paper cone passive radiators.5.25" (10.2cm) paper cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes. Folded bass reflex port.
Binding PostsLow-profile push styleLow-profile push stylePush style with banana jacks
Weight9lbs. (4.1kg) each6.5lbs. (3kg) each9.5lbs. (4.4kg) each
Overall Dimensions
(HxWxD)
34.1 x 6.4 x 1.89 (86.7cm x 16.2cm x 4.8cm)25.3 x 6.4 x 1.83 (64.2cm x 16.2cm x 4.75cm)11.1 x 12 x 6 (28.2cm x 30.5cm x 15.2cm)


 
 Motion 50XTMotion 30Motion 8Motion 6
MSRP (US)$899.95 each$649.95 each$399.95 each$299.95 each
Frequency Response50–25,000 Hz ±3dB65–25,000 Hz ±3dB70–25,000 Hz ±3dB120–25,000 Hz ±3dB
Dispersion80° x 30°80° x 80°80° x 80°80° x 80°
Sensitivity94 dB/2.83 volts/meter91 dB/2.83 volts/meter89 dB/2.83 volts/meter89 dB/2.83 volts/meter
Nominal Impedance4 Ohms. Compatible with 4, 6 or 8 ohm rated amplifiers.4 Ohms. Compatible with 4, 6 or 8 ohm rated amplifiers.4 Ohms. Compatible with 4, 6 or 8 ohm rated amplifiers.4 Ohms. Compatible with 4, 6 or 8 ohm rated amplifiers.
Recommended Amplifier Power20-300 watts per channel20-200 watts per channel20-180 watts per channel20-130 watts per channel
Crossover Frequency900 & 2,200 Hz400 & 2,600 Hz3000 Hz3300 Hz
Crossover ComponentsCustom air core coil and low DCR steel laminate inductors. Polyester film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection.Custom air core coil and low DCR steel laminate inductors. Polyester film capacitors in series and low DF electrolytic capacitors in parallel. Overall system thermal/current protection.Custom air core coil and low DCR steel laminate inductors. Polyester film capacitors in series and low DF electrolytic capacitors in parallel. Overall system thermal/current protection.Custom air core coil and low DCR steel laminate inductors. Polyester film capacitors in series and low DF electrolytic capacitors in parallel. Overall system thermal/current protection.
High Frequency Transducer1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm1" × 1.4" (2.6cm × 3.6cm) Folded Motion Transducer with 5.25" × 1.75" (13.3cm × 4.4cm) diaphragm1" × 1.4" (2.6cm × 3.6cm) Folded Motion Transducer with 5.25" × 1.75" (13.3cm × 4.4cm) diaphragm1" × 1.4" (2.6cm × 3.6cm) Folded Motion Transducer with 5.25" × 1.75" (13.3cm × 4.4cm) diaphragm
Low Frequency DriverTwo 6.5" (16.5cm) aluminum cone with cast poly- mer basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes.Two 5.5” (14cm) aluminum cone with cast polymer basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes.Two 4" (10.2cm) paper cone with stamped steel basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes. Sealed.Two 3.5" (8.9cm) poly cone with stamped steel basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes. Sealed.
Binding PostsCustom 5-way bi-wire tool-less binding postsCustom 5-way tool-less binding postsPush style with banana jacksPush style with banana jacks
Weight30.5lbs. (13.8kg) each18lbs. (8.2kg) each8.5lbs. (3.85kg) each6lbs. (2.72kg) each
Overall Dimensions
(HxWxD)
7.6 x 22.8 x 12.8 (19.2cm x 58cm x 32.6cm)6.9 x 16.5 x 10.5 (17.5cm x 42cm x 26.6cm)5.6 x 22.25 x 5.25 (14.2cm x 56.5cm x 13.3cm)5.25 x 17.5 x 3.75 (13.3cm x 44.5cm x 9.5cm)




 
 Motion Vision
MSRP (US)$1,499.95 per system
Frequency Response43–23,000 Hz ±3dB
Amplifier Power100 Watts (200 Watts peak) combined total output across 7 amps.
Crossover Frequency3000 Hz
Components & DecodingDSP based preamplifier, Dolby® Digital, DTS Digital Surround™.
High Frequency TransducerThree 1" × 1.4" (2.6cm × 3.6cm) Folded Motion Transducer with 5.25" × 1.75" (13.3cm × 4.4cm) diaphragm
Low Frequency DriverFour 4" (10.2cm) fiber cones with extended throw drive assembly. Non-resonant asymmetrical chamber format.
CabinetPorted
ControlsTop mounted controls and included remote control.
Inputs(2x) Optical SPDIF (digital optical), (1x) Coax SPDIF (digital coaxial), (1x) Analog RCA Right/Left, (1x) AC Power
Outputs(1x) Subwoofer Out via analog RCA
Wireless OutputBuilt-in SWT-2 Subwoofer Wireless Transmitter compatible with select MartinLogan subwoofers.
Remote BatteryCR2025 3V
Power DrawMax: 120 Watts Idle: 9 Watts Standby: < 0.3 Watts
Weight20.5lbs. (9.3kg) each
Overall Dimensions
(HxWxD)
5 x 39.9 x 5.85 (12.7cm x 101.3cm x 14.8cm)
 
Facebook Twitter YouTube Flickr Instagram

©1982-2014 MartinLogan, Ltd. All Rights Reserved.   | Privacy PolicyUnauthorized Dealers WARNING

United States United States