Montage builds on the technology behind the groundbreaking Mosaic to deliver classic MartinLogan sound at an even more affordable price. Key to both is our new ATF™ (Advanced Thin Film) dipole drivers. Superior in almost every way to conventional moving-coil transducers (cones and domes) – and very similar in most respects to the electrostatics that we've always favored – ATF drivers project a wonderfully detailed and three-dimensional sound field. Our proprietary Vojtko™ crossover topology marries the ATF drivers to a high-resolution 6.5-inch aluminum-cone woofer, whose quick, precise bass provides the speaker's sonic foundation.
Fully compatible with all audio/video equipment, Montage excels in almost any application, whether as a stereo pair in a music system or as front or surround speakers in a home theater setup. Made entirely of wood, the cabinet borrows the sonically welded, constrained-layer construction of Clarity and Mosaic to express a fluid, modern visual style.
Based on RADIA planar technology, high-resolution ATF™ drivers approach the clarity and detail of our electrostatic panels while permitting the use of a compact cabinet. Each MartinLogan ATF transducer has a micro-thin, low-mass diaphragm with an ultra-light, etched aluminum conductive surface, suspended between two opposite-polarity, high-field-strength neodymium magnet arrays. When the electrical audio signal from an amplifier passes through the diaphragm's surface, it creates an alternating electromagnetic field that interacts with the fields of the fixed magnet arrays, forcing it back and forth to produce sound waves in the air. The strength and polarity of the diaphragm's field varies according to the audio signal.
Like our electrostatic panels, ATF drivers are push-pull transducers: When the diaphragm's field polarity is the same as that of the magnet array on one side, pushing them apart, it is the reverse of the polarity on the other side, pulling it toward that opposing array with exactly the same force. This mode of operation is inherently linear. Another similarity to electrostats is that the diaphragm is driven uniformly over its entire surface, rather than at just a small contact area as in a conventional cone or dome driver. These two characteristics ensure precise, accurate reproduction with vanishingly low distortion.
The diaphragm substrate is Dupont Kaladex® PEN (polyethylene napthalate). This material is chemically akin to the PET (polyethylene terathylate) film used for the diaphragms of our CLS™ Generation 2 electrostatic panels, but capable of handling the heat generated by the current passing through an ATF diaphragm's thin aluminum skin.
By eliminating cone flexure, aluminum diaphragms help our advanced-technology woofers achieve the very low distortion necessary for proper blending with MartinLogan electrostatic panels.
Carefully hand-built using only the finest polypropylene capacitors and air-core coils, the crossover employ's MartinLogan's proprietary Vojtko topology for vanishingly low distortion and seamless driver integration. This precision-tuned network preserves even the most microscopic sonic nuances while handling the full dynamics of any source.
The sound we hear from a loudspeaker is a combination of direct radiation from it to our ears and reflections off of room surfaces – walls, floor, and ceiling. How our brains integrate all this information is far from simple. Depending on the angle of incidence to the ears and the arrival-time difference between direct and reflected sound, reflections can either blur detail and stereo imaging or enhance the natural impression of depth and openness.
True dipole speakers have long been noted for their near-ideal radiation patterns. They send very little sound to the sides, thereby minimizing side-wall reflections with short arrival times that tend to interfere with perception of the direct sound. Their strong rear radiation, however, produces a generous amount of ambience-enriching later-arriving reflections off the wall behind them.
MartinLogan's proprietary toolless binding posts make cable connection and management easy.
Montage's cabinet is constructed of multiple wood laminates, sonically welded for extreme rigidity and inertness. This same technique enables the cabinet to be made with gentle curves that enhance its visual integration into the home. It is available in native cherry or black.
The Montage is supplied with sturdy, 1/4-20 MiniETC™ spikes, which can be used in place of the standard feet to enhance stability on thick carpets or to create tighter coupling between speaker and floor.
Montage's size, styling, and performance make it suitable for almost any speaker application, even in combination with our electrostatic models. In small rooms or large, as part of a stereo music system or in a home theater as fronts, surrounds, or both, Montage delivers.