Support | Wireless Speakers | MartinLogan®
« Back to Setup and Configuration

How do I put my wireless audio device into discovery mode?

Created: 09/28/15 | Updated: 12/04/15


There are three methods of discovering your wireless audio device: 

  • WPS (Wi-Fi Protected Setup)

  • Access Point

  • Hardwired with Ethernet


WPS

  • For 3 seconds, press the device’s Wi-Fi Setup button until you hear a tone. Release the button after the first tone.

  • Wi-Fi Status indicator will blink twice in continuous intervals to indicate WPS mode.


Access Point

  • For 8 seconds, press the device’s Wi-Fi Setup button until you hear two tones. Release the button after the second tone.

  • After 20 seconds, the Wi-Fi Status LED will begin pulsing slowly to indicate Access Point mode is ready.


Ethernet

  • Turn off your wireless audio device.

  • Connect your wireless audio device to your router using an Ethernet cable.

  • Turn on your wireless audio device.

  • After booting, the Wi-fi Status LED will turn off to indicate a hardwired connection.



 
Facebook Twitter YouTube Flickr Instagram

©1982-2018 MartinLogan, Ltd. All Rights Reserved.   | Privacy PolicyUnauthorized Dealers WARNING

United States United States