Support | Wireless Speakers | MartinLogan®
« Back to Troubleshooting

How do I do reboot my wireless audio device?

Created: 09/28/15 | Updated: 12/07/15


Rebooting your wireless audio device will force it to reconnect to your network.  

Bravado

  • Press and hold the power button for 3 seconds. The reset tone will sound once. This reboot will cycle the power off and on and force the wireless audio device to reconnect to your network. Network settings will not be cleared.


Crescendo

  • On the rear panel of the Crescendo, press the Power button off and on. This reboot will cycle the power off and on and force the wireless audio device to reconnect to your network. Network settings will not be cleared.


Cresendo X

  • For less than 3 seconds, insert a pin or other small object into the small hole above the “Reset” label on back of the speaker. A single tone will sound. This reboot will cycle the power off and on and force the wireless audio device to reconnect to your network. Network settings will not be cleared.


Forte

  • Press and hold the power button for 3 seconds. The reset tone will sound once. This reboot will cycle the power off and on and force the wireless audio device to reconnect to your network. Network settings will not be cleared.


Motion Vision X

  • On the soundbar’s top control panel, press and release both the Next and Previous Input (< and >) buttons. Upon releasing the button, the reset tone will play once. This reboot will cycle the power off and on and force the soundbart to reconnect to your network. Network settings will not be cleared.




 
Facebook Twitter YouTube Flickr Instagram

©1982-2018 MartinLogan, Ltd. All Rights Reserved.   | Privacy PolicyUnauthorized Dealers WARNING

United States United States