Ergebnisse: 1 - 10 von 203
The following MartinLogan products feature Play-Fi technology: Bravado Crescendo X Forte Motion Vision X DTS is constantly adding new music services to work with the Play-Fi system, check back often for updates. iOS (using...
Created: Sep 28 2015 | Updated: Aug 24 2018
Play-Fi streams audio directly from source devices to the speakers, and supports a wide variety of streaming formats and audio quality levels. Supported File Formats .mp3 (MPEG Layer III) .aac and .m4a (Advanced Audio Coding / Apple Lossless) .flac (Free Lossless Audio...
Created: Sep 28 2015 | Updated: Aug 24 2018
The process for adding additional MartinLogan wireless audio devices to your network is no different than the process used to connect your first. Refer to the user’s manual that came with your wireless audio device for specific instructions.
Created: Sep 28 2015 | Updated: Aug 24 2018
MartinLogan wireless audio devices require a wireless network and a high speed internet connection (for streaming services). A strong wireless connection is needed at the locations you plan to have your wireless audio devices located. Most modem/router combos provided by an...
Created: Sep 28 2015 | Updated: Aug 24 2018
The information on this page pertains the the following Play-Fi compatible products Bravado Cadence Crescendo X Forte Motion Vision X Unison Wi-Fi Light is Solid This indicates the Play-Fi product has the network setup information, and is connected to the network....
Created: Sep 28 2015 | Updated: Aug 24 2018
Add a compatible wireless audio device to your network using our setup guide. You will need to create an account with the service you are planning to use. Check the streaming companies website for more details. Open the Play-Fi app and connect to your wireless audio device. In...
Created: Sep 28 2015 | Updated: Aug 24 2018
Creating a Stereo Pair [Android or iOS app] If you are not in the main Play-Fi window, select the Play-Fi icon in the bottom right corner. In the top left hand corner of your screen you will be able to select the menu button in the top left corner (gear icon). You will see...
Created: Sep 28 2015 | Updated: Aug 24 2018
Play-Fi assigns the first wireless audio device you select as the “Primary Zone” for the audio stream. It controls the stream and syncs the audio between the other audio devices. If the Primary unit is turned off it disables the stream and all connected secondary units will stop streaming....
Created: Sep 28 2015 | Updated: Aug 24 2018
If you are experiencing difficulties streaming from the Play-Fi app for your Windows PC, try the following: Change your network type from “Public” to “Home” or “Work”. Enable Network Sharing. Run the app in Administrator mode. Ensure DTS Play-Fi is allowed in...
Created: Sep 28 2015 | Updated: Aug 24 2018
The Forte amplifier uses standard binding posts, compatible with spades, bare wire, pins, or banana plugs. Connect the positive (red) terminal of the amp to the red terminal of your speaker, and the other speaker wire from the black terminal of the amp to the black terminal of the...
Created: Sep 28 2015 | Updated: Dec 07 2015