During the unprecedented impact of COVID-19 we have reduced both staff and hours of operation. Because of this, all calls may not be answered. For all technical support related inquires we encourage you to email service@martinlogan.com and sales@martinlogan.com for sales inquiries. Please expect a slightly longer response time than usual. Thank you for your understanding during this time.

Troubleshooting Wireless Products

« サポートホームに戻る

Play-Fi device firmware update failed.

Created: Dec 07 2015 | Updated: Mar 20 2018

A Play-Fi device update can fail because the Wi-Fi connection between the Play-Fi device, phone, tablet, or PC and router was interrupted, either because of heavy network traffic, an obscured signal, or wireless interference. If the update fails repeatedly, try moving your Play-Fi device and phone, tablet, or PC near your Wi-Fi router during the update.

If you are attempting to update many speakers at once and it appears that an update is particularly lengthy or large based on your first attempt, turn off all of the speakers, and then turn just one on at a time to complete the update for each one separately.  

If updates are failing repeatedly at the same point in the process, exit the app, turn your Play-Fi product and the phone, tablet, or PC off and on again, and then try the update procedure again.

If this does not help, you will need to perform a manual Play-Fi firmware update.

 

 

 

 

妥協のないパフォーマンス明瞭な精度揺るぎない信頼性静電気の原理の無数の技術的な利点を利用して、真の形式で音を再現します。これがMartinLoganのすべてです。