During the unprecedented impact of COVID-19 we have reduced both staff and hours of operation. Because of this, all calls may not be answered. For all technical support related inquires we encourage you to email service@martinlogan.com and sales@martinlogan.com for sales inquiries. Please expect a slightly longer response time than usual. Thank you for your understanding during this time.

Setup and Configuration of Subwoofers

« サポートホームに戻る

How/Where do I set the subwoofer's Power Controls?

Created: Jul 16 2018 | Updated: Aug 24 2018

Depending on model, the subwoofer's Power control will be on the subwoofer's main control panel (either on the front, back, or bottom). 

Depending on which subwoofer you own, you will have different options for Power Controls. 

When set to "On" a subwoofer will be powered on all the time.

When set to "Off" a subwoofer will be powered down.

When set to "Auto" a subwoofer will power on and off automatically, which eliminates the need for a manually operated power switch and turns the subwoofer on whenever there is an input signal. If no input signal is sensed after a period of time the subwoofer will switch off automatically.

When set to "Trigger" the subwoofer’s power on/off to be controlled by components that have trigger outputs (Preamp/Processor or A/V Receiver, etc.) using a 3.5mm cable. It’s good to note that some products will work with only a mono cable, others with only stereo cables and some will work with either, so if you are having.

For information specific to your subwoofer's Power Control, please refer to the subwoofer's manual.

妥協のないパフォーマンス明瞭な精度揺るぎない信頼性静電気の原理の無数の技術的な利点を利用して、真の形式で音を再現します。これがMartinLoganのすべてです。