Setup and Configuration of Wireless Products

« サポートホームに戻る

How do I put my wireless audio device into discovery mode?

Created: Sep 28 2015 | Updated: Aug 24 2018

There are three methods of discovering your wireless audio device: 

  • WPS (Wi-Fi Protected Setup)
  • Access Point
  • Hardwired with Ethernet

WPS

  • For 3 seconds, press the device’s Wi-Fi Setup button until you hear a tone. Release the button after the first tone.
  • Wi-Fi Status indicator will blink twice in continuous intervals to indicate WPS mode.

Access Point

  • For 8 seconds, press the device’s Wi-Fi Setup button until you hear two tones. Release the button after the second tone.
  • After 20 seconds, the Wi-Fi Status LED will begin pulsing slowly to indicate Access Point mode is ready.

Ethernet

  • Turn off your wireless audio device.
  • Connect your wireless audio device to your router using an Ethernet cable.
  • Turn on your wireless audio device.
  • After booting, the Wi-fi Status LED will turn off to indicate a hardwired connection.

 

妥協のないパフォーマンス明瞭な精度揺るぎない信頼性静電気の原理の無数の技術的な利点を利用して、真の形式で音を再現します。これがMartinLoganのすべてです。